|
| PRODUCTS |
|
|
|
The model 4-20 IQ is a microprocessor based intelligent sensor transmitter. It comes equipped with a digital display which provides a local reading of the gas concentration. Operating on 14-24 VDC power, it provides a linear 4-20 mA output proportional to the gas concentration, and is housed in an explosion-proof casing. The 4-20 IQ has been UL Classified and CSA Approved Class I, Div. 1, Groups B, C, and D. The 4-20 IQ can operate as a stand-alone instrument, or it can be used with an IST control unit to provide control room readings and alarm relays.
|
|
 |
| Download PDF |
|
|
The model SM95 sensor transmitter is housed in an explosion-proof casing and operates on 14-24 VDC power. The SM95 has been UL Classified and CSA Approved Class I, Div. 1, Groups B, C, and D. The SM95 provides a 4-20 mA linear output proportional to the gas concentration and is calibrated by adjusting potentiomenters located inside the housing. The SM95 can operate as a stand-alone instrument, or it can be used in conjunction with any of IST's complete line of control units which provide control room readings and alarm relays
|
|
 |
| Download PDF |
|
|
|
|
| |
The MP202 and MP204 are wall-mounted, microprocessor-based control units housed in weatherproof enclosures. The MP202 is a two-channel controller which can be used for 1 or 2 sensor channels, while the MP204 is a four-channel controller which can be used for up to 4 sensor channels. A front door keypad enables convenient operation of the controller without the need to open the enclosure. Standard features include: 3 alarm setpoints per channel, digital display per channel, common relays.
|
|
 |
| Download PDF |
|
| |
The LC-100 is a stationary, single-channel, wall-mounted control unit for the detection of over 150 different toxic and combustible gases for area air quality and safety applications. The LC-100 can be used with many sensor technologies including Solid State, Electrochemical, Catalytic Bead, Infra-red, and more!
|
|
 |
| Download PDF |
|
| |
S2K Sampling System is a flexible sampling system which is designed to condition the sample as required. This system not only brings the sample to the sensor, in many cases, it is the only viable solution to difficult applications.model S2K's ability to dilute samples allows the sensor to be exposed to the sample and provide an accurate reading. Another advantage of non-continuous sampling is the fact that the zero point is confirmed on every reading which increases the confidence level of the measurement.
|
|
 |
| Download PDF |
|
|
|
|
|
|
The Remote-Link System is a state-of the are, computer -controlled, gas monitoring system which allows sensors to communicate with the Remote-Link Computer over a data highway - eliminating the individual sensor wiring associated with conventional monitoring systems. The Remote-Link's powerful monitoring software includes such features as data archiving and reporting, curve plotting, alarm processing, and fault monitoring. Additionally, a graphics display shows a drawing of your plant and the locations of a ll the sensors within your plant. By using the mouse button to point and click a sensor, you can view it's current reading and alarm status.
|
|
 |
| Download PDF |
|
|
|
|
| |
The IQ-1000 and TLV Panther have impressive capabilities, yet still remains convenient and easy to use. Calibration is simple and automated, with no manual adjustments necessary. The TLV Panther even has a completely automated calibration mode that allows the microprocessor to calibrate all of the active gases for the PID with the push of a button. Thus, the user can calibrate 10, 20, or even 30+ gases in less than a minute! Besides easy calibration, operation is a snap. Simply select the gases you want to monitor and the microprocessor based unit will do the rest.
|
|
 |
| Download PDF |
|
| |
IQ-250 is a single-gas, portable instrument which can be equipped with solid state sensor. Any one of over 150 toxic and combustible gases can be chosen for detection. The sensor is attatched via a coiled cord which allows readings to be taken up to 24" from the unit.
IQ-350 is a single-gas, portable instrument which provides all of the features of the IQ-250, and in addition, it comes equipped with an internal sampling pump and wand assembly.
|
|
 |
| Download PDF |
|
| |
The IQ-200 is easy to use as well. Just slide the power switch on and you're ready to go. All alarms are factory preset. Alarm LEDs indicate low, mid, and high alarm levels for the solid state sensor, and low and high alarms for the oxygen sensor. The IQ-200 also has an audible alarm buzzer to alert you to hazardous gas conditions. Also, verifying proper operation of the unit is easy and is accomplished by simply exposing the unit to 50% LEL methane.
|
|
 |
| Download PDF |
|
|
|
| |
Alarm devices are turned ON/OFF via relay contacts that are part of the controller, which set the threshold limits that activate the relays. A typical alarm sequence is to activate a yellow light for Low alarm, and then to activate a red light and audible signal for a High alarm. It is often desirable to silence the audible alarm while investigating the source of alarm. However, a simple ON/OFF switch which disables the audible alarm can be dangerous as the alarm condition can remain while there is nothing to signal it. Therefore, it is important to consider an alarm processor to ensure proper safety.
|
|
 |
| Download PDF |
|
|
|
|
|
